375 win

[usmc1963]

just got an old marlin lever gun in 375 what is a good boolit mold 200 to 350 grain to use

[Tatume]

Here's one that will shoot well. You may have to size them, but you should try them unsized first. If ammunition loaded with the unsized bullet will chamber, it is safe to shoot. Unlike so much stuff now-a-days, it is available right now too ($20).

http://www.midwayusa.com/product/476137/lee-2-cavity-bullet-mold-379-250-rf-375-winchester-38-55-wcf-379-diameter-250-grain-flat-nose

Take care, Tom

[runfiverun]

the lyman 375449 it takes a gas check but feeds perfectly and shoots straight in the marlin.
I size mine to 379.
any powder in the AA-1680 or so burn range will do well also.

[MOA]

http://i857.photobucket.com/albums/ab136/nitroexpress450400/20140607_074603_zps937faded.jpg (http://s857.photobucket.com/user/nitroexpress450400/media/20140607_074603_zps937faded.jpg.html)

[Muskyhunter1]

I slugged my Marlin and it has a groove dia of .3775. I tried cast from .375 dia to. 381 dia. I got amazing accuracy with. 381. Both Reloader 7 and 4227 work really well. I picked up a 250 grain Ranchdog design mold from Tom at Accurate Mold. Good luck

[BAGTIC]

More accuracy problems are caused by undersized bullets than by oversized bullets.

[crackers]

Funny thing about Lee ads/pictures anymore - they really like to show the old style.

[High Desert Hunter]

http://noebulletmolds.com/NV/product_info.php?cPath=52&products_id=561&osCsid=ketsp5a6vkb6vjlmgcbv270hj0

This is one I might choose, I will using a 375 Ruger, but will duplicate the velocities from a 375 Win.