View Full Version : MRC Mequon loaders
scbuxton
05-02-2015, 08:48 PM
I need a scan of an instruction sheet for a MRC improved straight wall case loader. I have aquired a MRC 32s&w short loader and I need the information contained in the load data sheets. Any help would be greatly appreciated. Thanks
littlejack
05-06-2015, 11:15 PM
Apparently, no one has any information about the MRC loaders, BUT, "Welcome to the Castboolits sir"
Jack
I think there is a 32 Smith and Wesson and a .32 Smith and Wesson Long.
I don't think there is any .32 S&W short. There is a .32 Short Rimfire
But here is the Lee data before that old company turned into Mequon. http://leeloaderdata.com/index.htm
138896
(http://leeloaderdata.com/index.htm)
nitro-express
05-08-2015, 09:25 AM
I have a set in 357 Mag and I'm impressed with it, seems a bit better quality than the LEE version. The hand priming tool is a nice touch.
I scanned the instructions and load chart, just in case anyone is interested.
https://www.dropbox.com/s/dyjxi5c3g94amp9/MRC%20357%20Mag%20Load%20Chart.pdf?dl=0
https://www.dropbox.com/s/dcrorc5bwlypay2/MRC%20Pistol%20Inst.pdf?dl=0
scbuxton
05-10-2015, 08:47 PM
Thanks for the kind welcome and the information.
EDG, I found the 32s&w short on the shelf right down from the 45 long colt.:bigsmyl2:
I could have sworn I saw it next to the 38 Extra Long Rimfire.
Thanks for the kind welcome and the information.
EDG, I found the 32s&w short on the shelf right down from the 45 long colt.:bigsmyl2:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.