cowboybart
05-02-2015, 02:53 PM
I just picked up a set of 8x68 Imp and 6.5x68 reamers and plan on a set of Mausers in the future.
I'm looking at making brass from 375 Ruger basic. My ShadeTree forming dies won't help with the fatter case so I am looking at using a series of standard dies. These are the FL die sets that I have that may help:
358 Norma
300 Win
30 Newton
300 WSM
270 WSM
6.5 WSM
6.5x68
I don't have a set of the 8x68 30* Imp dies yet, but I do have a die reamer for them. It might take me some time to get 8x68 Imp dies made.
I have a 338WM seating die, but not the sizer.
I'll take any advice on sizing steps. If I crash and burn I can buy the brass, but it is about $3 ea.
I'm looking at making brass from 375 Ruger basic. My ShadeTree forming dies won't help with the fatter case so I am looking at using a series of standard dies. These are the FL die sets that I have that may help:
358 Norma
300 Win
30 Newton
300 WSM
270 WSM
6.5 WSM
6.5x68
I don't have a set of the 8x68 30* Imp dies yet, but I do have a die reamer for them. It might take me some time to get 8x68 Imp dies made.
I have a 338WM seating die, but not the sizer.
I'll take any advice on sizing steps. If I crash and burn I can buy the brass, but it is about $3 ea.