Another Newbe Question

[Tenbender]

Single lube groove or Double ? I'm into 30 30's , 45 Colt and 7X30's.
I don't want to buy this equipment but once. LOL

[Minerat]

Good Luck, 1 year ago I was going to buy 1 mould for my 41 mag. I how have 13 from 9mm to 45 colt and 2-30 cal. I have to admit I have only bought the equipment once...... for each caliber .... for each press type and once for each sizing die. Remember you are getting in this to save money.;)

All kidding a side, If you go to powder coating or BLL you probably only need one, a crimp groove. If you use Ben;s Red or Felix Lube then most boolits have to have 2 or more including the crimp groove. It depends on what mould you choose. Half the fun is reading what works for guys here and maybe even getting some samples to see what your guns might like.

[pworley1]

The short answer is yes. Like minerat said, the equipment just grows and you always need one more mold which needs one more sizer which needs one more .... You get the picture. Enjoy.

[runfiverun]

i prefer one single lube groove.
i can modify the lube to release more or less oil as needed if necessary but i for sure prefer my designs with one single lube groove.