30calpal
04-17-2015, 01:30 PM
Most everybody on this sight reloads, right? We know that for best accuracy, the bullet should fit the throat, right? I would like to know what you guys are finding is the nominal /average chamber /throat dimensions for Mod 94 in 45 Colt? Just shout out some numbers of your chambers /throats. I know about proprietary reamers, reamers that wear down during the work day, every gun is different and all the other things that cause variations in dimensions. What I want is a bunch of data from you guys who have measured your chambers /throats so I can come up with a 'nominal' 'average' dimension that folks, who have or are thinking of getting a 94 in 45 Colt, can get an idea of what to expect when getting a mould and reloading for this rifle. Of course, far and away the best way is to do your own chamber cast before you begin dropping bullets. I'm not there yet, just want some numbers if you have them. Thanks.