Need .35 Remington Data

[xvigauge]

Anybody have any data for the .35 Remington with 220 grain cast boolits using RL-7, 3031, and/or Unique?
xvigauge

[NuJudge]

If you do a search of various powder makers & marketers, you'll probably find a lot of it for use with jacketed 220 grain bullets, and cast bullets always have less pressure than jacketed. One source I look at a lot is Steve's Pages:
http://stevespages.com/358_1_220.html

[xvigauge]

Thanks NuJudge. This data will work. The bollits I have are actually 218 grain, lubed and gas checked. Based on all of the data I could find, I believe the following data is safe with these boolits: 23 grains RL-7, 31 grains 3031, and 29 grains H322 (which I also have). I'm going to load up some of these tonight, so if anyone thinks these loads would be unsafe, please stop me.
xvigauge

[imashooter2]

I shoot 31 grains of RL7 under the RCBS 35-200-FN. 1,932 fps average, boolits are 212 grains checked and lubed, rifle is a Marlin 336.

http://home.comcast.net/~imashooter2/pictures/RCBS_35-200-FN.jpg

[xvigauge]

I shoot 31 grains of RL7 under the RCBS 35-200-FN. 1,932 fps average.

http://home.comcast.net/~imashooter2/pictures/RCBS_35-200-FN.jpg

That's a nice group.
xvigauge

[brown bass hunter]

That's a nice group.
xvigauge


Nice shooting !

[xvigauge]

Today I fired the loads mentioned in post #3 in my Model 141 Remington in .35 Remington. They were pretty accurate and the loads with the RL-7 powder were very accurate as in right around 1 1/2" groups. In fact, all of these loads were just as accurate as my 200 grain jacketed bullet loads. Thanks guys for all the info.
xvigauge