Need screws for Win 52D front .375 base.

[haswipp]

Hi,

I'm looking for a few 6x48x7/16" long screws to fit my front base for globe sight. I have screws but all the heads are to tall to fit in the cutout of the base where the head fits into. The head should be a flat top not a slight bevel.

Thanks

[Bigslug]

See what the kind folks at Brownell's can muster for you: http://www.brownells.com/search/index.htm?k=6-48+screw&ksubmit=y

[haswipp]

I already have the brownells kit the fillister head have a slight bevel the heads stick up to high for the globe to slide over. I will have to do some redneck engineering.