35 Cal. Boolits

[45-70 Chevroner]

I thought this would be a good place to see if there is any interest in them.
I have a 100 or so of these boolits. They Look identical to a Keith SWC except they weigh 215gr. The are .358 to .359 in diameter, they are a gas check design and with the GC and lubed they weigh about 219 to 220 gr, they have two grease groves, one wide one and a smaller one I thought they would work nicely in a single shot. If there is no interest, no problem, they go back in the pot. They are not sized and lubed. I do not have the mold.

[richhodg66]

I wouldn't mind having a few to try out. PM me please with what you need for them or if there are any kind of bullets you might want to try out in exchange for some.

I think that is a current production mold of Lyman's, so if they work out real good, it might be worth it to get a mold.

[Mk42gunner]

Sounds like the Lyman 358627 to me. Originally brought out for the .357 Max.

I believe there was also a group buy I think from Lee several years ago.

Robert

[Tatume]

It also sounds like it could be RCBS 35-200-FN, which is an excellent bullet for 35-caliber rifles and the 357 Maximum.

[rockrat]

Does sound like the 358627. the 35-200 is not a keith swc design.

[Tatume]

A photo would help.

[zuke]

A picture does indeed say 1000 words

[MrWolf]

I wouldn't mind having a few to try out. PM me please with what you need for them or if there are any kind of bullets you might want to try out in exchange for some.

I think that is a current production mold of Lyman's, so if they work out real good, it might be worth it to get a mold.

I feel the same way. Please let me know what you would like for a sample of them to try.

Ron

[45-70 Chevroner]

richhogde66 has sent a check for all of them. Thanks for all the response.