View Full Version : .32 H&R Sizing Question
tomf52
03-04-2008, 11:22 AM
Have a Marlin Cowboy in .32 H&R Mag that slugs out at .312 and a Lee 90 gr TL SWC that drops out of the mold at .315. Is that a doable combination without sizing? A dummy round chambers with no resistance. Thanks for any help with this. Tom
felix
03-04-2008, 11:33 AM
By all means, shoot it without qualms. The trick is to have the largest diameter boolit that will chamber without friction for the best accuracy. ... felix
tomf52
03-04-2008, 11:56 AM
Felix - Thank you, Tom.
Not only doable but a one holer at 25 yards with a light load of Red Dot.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.