PDA

View Full Version : 158 Grain Full Wadcutter Mold


Cd662
03-01-2015, 02:10 AM
Hey folks, I've been on this site for awhile but mostly as a lurker. I've been looking for a 158 grain FULL wadcutter mold. I know they exist since they sell one over at Matt's Bullets, but I haven't come across one too often. Does anyone here know of any molds I could look for to cast these? They would be used for 38 Special, or perhaps seated in 357 magnum cases.
jmort
03-01-2015, 02:19 AM
Accurate Molds
Calamity Jake
03-01-2015, 02:46 AM
Saeco makes a 150 grain.
cga
03-01-2015, 02:54 AM
E-bay has 1 Lyman 358432 http://www.ebay.com/itm/Ideal-Lyman-2-cavity-Mold-358-432-/281437119910
tazman
03-01-2015, 05:08 AM
My Lyman 358432 mold drops boolits at 155 grains. they shoot quite well.
Dusty Bannister
03-01-2015, 10:51 AM
Hey folks, I've been on this site for awhile but mostly as a lurker. I've been looking for a 158 grain FULL wadcutter mold. I know they exist since they sell one over at Matt's Bullets, but I haven't come across one too often. Does anyone here know of any molds I could look for to cast these? They would be used for 38 Special, or perhaps seated in 357 magnum cases.


http://www.mattsbullets.com/index.php?main_page=index&cPath=65

Note that this product page even tells you this is the Lyman 358432 mold.
bhn22
03-01-2015, 10:55 AM
There's a four cavity 358432 on GunBroker, ending in a few hours.
cuzinbruce
03-01-2015, 11:47 AM
Modern Bond D-358
http://castpics.net/dpl/index.php/the-library/moulds/30-mold-catalogs-of-old/105-modern-bond-molds

I have, or had, one somewhere. Same idea as Lyman 429352. I think I found it on eBay.
Beagle333
03-01-2015, 11:54 AM
Go with a 358432. :cool: This one is a HP.

http://i613.photobucket.com/albums/tt214/shutupandjump/cast%20boolits/Picture066_zps2d89564c.jpg
bhn22
03-01-2015, 12:41 PM
I came dangerously close to doing that with my old 2 cavity 358432. I ended up selling it instead because it was a pristine old mould with the original handles, in the original box for the mould with handles. I just couldn't do it!
SSGOldfart
03-03-2015, 02:40 AM
I'm still thinking about HP my 358432 soup can. But a 358 Hbwc will give me a perfect mushroom travelling under 500 fps so I really don't have a need to HP this classic old mold