need 500 s&w reloading data

[milltownhunter]

i new to makeing cast bullets i been casting bullets from a rsbs 400 gr mold and need some safe loads to use does anyboady have some loads to share i have two pistols and a tc rifle

[Ben]

Go to this web site, plenty of data for the 400 gr. cast bullet :

http://www.hodgdon.com/data/index.php

[wonderwolf]

Sounds like you need to acquire a reloading manual like Speer, Hornady etc. Use printed data first then ask for some recommended data. That way you have a good and safe starting point. Does anybody have printed data for cast boolits in the .500? That might be a moot point I guess.

Online sources should always be taken with a several gr of salt except for the data on the powder companies web site.

Also check out John Ross's web site http://john-ross.net/

If I remember right he has some additional load data there for the .500 :Fire:

[milltownhunter]

thanks alot

[GaryM]

Try here.
http://www.jturkoski.com/Home%20Page/Weapons%20Page/50-SW/reload-50.htm