View Full Version : Got a mold that has the Spru plate stop is broken
kungfustyle
02-17-2015, 09:57 PM
Hello,
I have a mold that I would like to get fixed. The spru plate stop post is broken off down below the top of the mold. Its a lyman 457124. Any Help.
WALLNUTT
02-17-2015, 10:10 PM
If you have a drill press you could drill it out and replace it with a roll pin. Don'y try it with a hand held drill.
Yodogsandman
02-17-2015, 10:12 PM
I believe that's a forced fit stud. You could drill it out and replace it with your own DIY stud. Better probably to return it to Lyman for servicing.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.