Where Can I Get a .431 or .432 sizing die

[buckwheatpaul]

Getting to set up to reload 44 mag in my Marlin rifle...need to find a sizer in .431 or .432 any help would be appreciated....Paul

[mac60]

Hey Paul - Have you ever done business with Buckshot? His work comes highly recommended. Don't know whether you need a push through or an H&I type die, from what I gather he is capable of making either. Just a thought.

[bhn22]

What sizer do you have?

[nagantguy]

I'd highly recommend buckshots work, top notch or you can do the old open up a Lee push through sizer die, I just did one took it to 431, a drill vice, slightly under sized wooden dowel very fine vrit sand paper say start with 300 and some buffing compound. Takes about 20 mins, go slow check often, its much harder to put metal back on! Mine started life as a 429 and ended up 431, which is what I needed.

[justingrosche]

If you want a Lee push thru, I have a .432 but I don't have the tub.

[ioon44]

Getting to set up to reload 44 mag in my Marlin rifle...need to find a sizer in .431 or .432 any help would be appreciated....Paul

The Star Equipment Corner thread contact lathesmith (http://castboolits.gunloads.com/member.php?2206-lathesmith) top quality work.

[dudel]

Another big +1 for Buckshot's work. Great quality, price and fast shipping. How often do you get all three?

[mdi]

Lubersizer or Lee push through type? Lee has a kit for sizing .430" (and a dowel some emery cloth, a drill, a bit of oil and some patience, and you can easily open it up to .432").

[justingrosche]

Lubersizer or Lee push through type? Lee has a kit for sizing .430" (and a dowel some emery cloth, a drill, a bit of oil and some patience, and you can easily open it up to .432").
Or you could buy/ swap me out of mine and be done with it.:bigsmyl2:

[chsparkman]

Getting to set up to reload 44 mag in my Marlin rifle...need to find a sizer in .431 or .432 any help would be appreciated....Paul

If you need dies for Lyman/RCBS you can get them at buffaloarms.com

[WALLNUTT]

Buckshot is cheaper than BuffArms easily as good.

[GLL]

I use lathesmith for STAR and Buckshot for everything else !
Both produce outstanding dies !

Buckshot push-through dies:
http://www.fototime.com/ABE5C78ECACBD2D/medium800.jpg

Jerry