View Full Version : Half cock hammer for H&R
Tackleberry41
02-16-2015, 09:55 AM
I have seen where some got rid of the transfer system in their H&R using a half cock hammer out of another model. They have so many on Numrich, I have no idea what I would need to buy for a SB2 rifle to convert it?
4060MAY
02-16-2015, 01:17 PM
The no transfer bar H&R is a rebounding hammer...looking like a half cock
Tackleberry41
02-16-2015, 06:39 PM
Okay, whatever the older models had, I wasnt sure what model parts I needed to go looking at on Numrich.
4060MAY
02-16-2015, 10:29 PM
The one I have..410 shotgun, Topper Model 58 on top of chamber
just has Harrington & Richardson on the left side of the frame
Serial number begins with AM25xxxx, this also has the lever next to the hammer, not behind it
Hope this helps
Good Luck
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.