Can someone ID this thing here pls?

[Expat74]

129944

Sorry for the small pic. Owner said it's a Corbin. I'd like to know the model and what this thing might be worth. Any ideas?
Could it be a MegaMite?

Thanks guys!

[ReloaderFred]

From the picture, it looks kind of like a Corbin CSP-1 press. If so, then it's a good press, and if you have the adaptors, or it's tapped for 7/8" x 14 threads, you can load ammunition on it, or swage bullets.

Hope this helps.

Fred

[Expat74]

It sure does. Thanks a lot Fred!

[contendernut]

Cap-2. Note the top of ram

[clodhopper]

I have two csp2 presses they look similar, but the two bars that hold the top on look like heavier material.
To me it looks like a die on top the ram.
Can you tell us more about the CAP press.

[257]

there appears to be a die screwed in ti the top of the ram could you unscrew it and see what size threads are on it also how tall is it from the table top to the top of the top plate ?if its a csp-1 I have seen them sell for around 400.00 and they sell quite quickly.

[Sasquatch-1]

Send the picture to Dave Corbin. He will definitely be able to tell you if it is one of his.

[Expat74]

Too late.. it's sold.. just not to me :(