Rapine Molds

[ddeaton]

Are they still in business? I have about 6 round ball molds and need a couple more. Great molds!

[winchester243]

Looks like these guys carry them.

http://www.ch4d.com/

Look under bullets.

Disclaimer, I've never done business with these folks so I can't vouch for them.

[crowbeaner]

Rapine is till in business; I posted their addy and contact info somewhere. I can't remember which site it was on; maybe here or TFL.

[TAWILDCATT]

Rapine bullet mould mfg
9503 landis lane-ha
east greenville,pa 18041
:coffee:---[smilie=1:---:Fire:
they advertize in handloader mag.

[Hardcast416taylor]

I have several of their moulds and am very well pleased with them. The product of theirs I really like is their mould prep solution. I LIGHTLY, with a q-tip, coat the bullet cavity of every new mould after I clean the mould first. I also use it on the sprue plate, top and bottom. Bullets simply fall out. I stay away from the spray Midway sells for mould prepping.:coffee:

[Ben]

http://www.ch4d.com/catalog/?p=88