View Full Version : Rapine Molds
ddeaton
02-27-2008, 08:12 PM
Are they still in business? I have about 6 round ball molds and need a couple more. Great molds!
winchester243
02-27-2008, 09:50 PM
Looks like these guys carry them.
http://www.ch4d.com/
Look under bullets.
Disclaimer, I've never done business with these folks so I can't vouch for them.
crowbeaner
02-27-2008, 10:43 PM
Rapine is till in business; I posted their addy and contact info somewhere. I can't remember which site it was on; maybe here or TFL.
TAWILDCATT
03-01-2008, 12:41 PM
Rapine bullet mould mfg
9503 landis lane-ha
east greenville,pa 18041
:coffee:---[smilie=1:---:Fire:
they advertize in handloader mag.
Hardcast416taylor
11-13-2008, 12:27 PM
I have several of their moulds and am very well pleased with them. The product of theirs I really like is their mould prep solution. I LIGHTLY, with a q-tip, coat the bullet cavity of every new mould after I clean the mould first. I also use it on the sprue plate, top and bottom. Bullets simply fall out. I stay away from the spray Midway sells for mould prepping.:coffee:
http://www.ch4d.com/catalog/?p=88
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.