Caseforming 9-Die Set amde by Shadetree Engineering

[maxreloader]

I have been searching and searching for a (discontinued long ago) 9 Die Case Forming set made by Butch lambert of Shadetree Engineering. I had a picture of the set someplace but can't find it. I will pay top-dollar if somebody has one they would be willing to part with or even a finders fee if you find one for me and the deal goes through. Any help would be greatly appreciated.

[EDG]

Butch Lambert posts a lot at Accurate Reloading. Check in custom rifles or just PM him.
He was still offering those sets about a year ago.

[maxreloader]

I spoke to Butch before I posted here... he only has his personal set left. I was hoping somebody has a set laying around collecting dust :-o

[fireball168]

Sent you a PM, I moved my set out of the way over the holidays.

[maxreloader]

Wooooooooohoooooooooo! Fireball is the man! Thank you so much!

[Hamish]

Ok, I think a couple of pics are in order,mmm,

[maxreloader]

well... since I paid for them already...
129884
This pic is property of fireball168.

You all should look into these if are inclined to wildcat...

[texassako]

Somewhere around here I have an article (Handloader?) that has dies similar to those, and how they were made. The author called them 'quick dies'. He had a few more parts to his, but he also had a lathe and knew how to use it.

[garandsrus]

Sorry for my ignorance, but what are you going to do with these? Are they all just reduction dies?

[justingrosche]

Also curios

[maxreloader]

i'm going to use them to experiment and reform brass. from the research I have done so far these are a necessary ingredient of that process. I don't own a lathe nor do I have access to a friend with one so this was one of my only options.

[maxreloader]

Thank You!

[6mm win lee]

my first project is going to be necking down a 50BMG to accept a .17 cal projo...

J/K J/K!!!

Oh that would be like my 50BMG-17HMR project in reverse.

[xman777]

Ok, so this worked for you, now I hope it works for me. Anyone else have a set they'd be willing to part with?

[justingrosche]

Oh that would be like my 50BMG-17HMR project in reverse.
a 17HMR necked to .50 cal, yes I'd like to see that.
A fellow I know was successful in necking a 38 special case to accept a 45 ACP bullet. As a gag of course. He called it his 45 tulip wildcat. Like a fat bulb on a thin stem I guess.
It does go to show with the proper technique and some patience, some miraculous things can be done with brass.