PDA

View Full Version : In need of 40 S&W data



wonderwolf
02-26-2008, 04:02 PM
My Hornady book does not list a 165 gr bullet. Can somebody give me a good mid level load using 165gr Jacketed bullet?

using a Common powder. Unique preferably

dubber123
02-26-2008, 04:35 PM
6.7 grs Unique = 1,075 fps. 170 gr. XTP, C.O.L. = 1.124" 33,800PSI. Hodgdon manual # 27.

JMax
02-26-2008, 05:25 PM
I use a Montana Gold 155 gr bullet on top of 5.1 gr of Unique or 4.9 gr of WW231 @ about 900 ft/sec. A very soft shooting load in all of my Glocks with excellent accuracy @ 25 yards. Back off a bit and give those loads a try.

wonderwolf
02-26-2008, 06:09 PM
I'm gonna be using Montana golds 165gr JHP

testhop
02-28-2008, 10:08 AM
My Hornady book does not list a 165 gr bullet. Can somebody give me a good mid level load using 165gr Jacketed bullet?

using a Common powder. Unique preferably

lyman list 5.4unique 952fps 18400psi
max6.0 unique 1034fps 21700psi

out of lymans 48th ed

MtGun44
02-28-2008, 11:13 PM
Hodgdon's site has tons of free data.

Bill

wonderwolf
02-29-2008, 01:11 AM
I believe I am going to go with the Unique load thank you very much for all your help. :drinks:

Down South
03-09-2008, 08:56 PM
I got this off Load Data. It was all that I could find using the 165 grain bullet.

165 Speer Gold Dot TMJ or GD-HP Alliant Unique 7.2 1064
Remarks: maximum load
165 Speer Gold Dot TMJ or GD-HP Alliant Unique 6.2 882


155 Speer GDHP Alliant Unique 8.0 1207
165 Speer GDHP Alliant Unique 7.2 1064