Need help finding good mould for 41 mag

[johns10mm]

Recently purchased ragingbull 41 mag. Looking to find good mould for casting like to use for hunting and target. Found saeco 418 looks o.k.but can't find any reveiws on it. Have been collecting wheel weights to use. Thanks for all help. Jeff

[LUCKYDAWG13]

i like the lee 195gr boolit for target and have in older lyman 220gr for hunting
welcome to castboolits

[Airman Basic]

This one's worked well for me for many years:
http://www.midwayusa.com/product/190050/rcbs-2-cavity-bullet-mold-41-210-swc-41-magnum-410-diameter-210-grain-semi-wadcutter
Just wish it had more cavities.

[pworley1]

The Lyman 410610 should fit the bill.

[Good Cheer]

410610 is a mighty champ of a boolit. Depending on the one you get it might need lapping out to be just big enough for your revolver but it's a great design.

If you find one laying around somewhere the old Lee 238 grain round nose plain base is a favorite of mine. Not much use except in mid range loads but hey, I love a .41 Special.

[shootzemm58]

@ Good Cheer, happen to know the LEE model #?

[shootzemm58]

Does or Did Lee make .224 rifle moulds

[Tar Heel]

If you can locate a SSK 275gr mold made either by NEI or another, It rocks.

http://www.sixguns.com/crew/sskbullets.htm

125573 125574

[osteodoc08]

H&G 258 or Lyman 410459

The all time classics. You can find a copy of these fairly easy if you look around. Depends on what you want to do.

[johns10mm]

Has anyone had the saeco 418 cant get a good pic of it, Like the looks of leadheads 230 keith. What are my options for the classics as osteodoc08 mentioned

[mattw]

I shoot the Lyman 410610 and an LBT 230 WFNGC. Both work very well.

[osteodoc08]

Johns10mm

id recommend a trip over to Toms website at accurate molds and look through his catalog. His 220k mold is his copy of the H&G 258. There are also several others to choose from. His molds are top notch and service/turnaround is very quick for, literally, custom work.

[GLynn41]

go to Mountain Mold and look at making just what you want

[leadman]

I have had the Saeco 220gr truncated Cone for about 9 years. Cast great, shoots great, probably not the best for hunting. I then bought the Saeco SWC but it dropped too small and the guy at Redding gave me a hard time with it. They are not a member of Saami so don't know the specs is for a .411" boolit, not .409" to .410".
I had the Lyman SWC gas check but it dropped small and our of round. A trip back to the manufacturer did not help this at all. no longer have it.
I have the Lee SWC also and it shoots ok, but the recently purchased RCBS 210gr SWC is a gret boolit.

If I had only one boolit to chosw from it would be the RCBS. I have pushed it to 1,550 fps with no gas check and it shot very well.

[HATCH]

Magma 220 grain FPRN is what I use.
I use it because I have a lever gun in 41 as well.
Good round and its deadly accurate in the right hands.....

[Jupiter7]

NOE has some 41's on sale.

http://noebulletmolds.com/NV/product_info.php?products_id=1439

[fredj338]

I like also the RCBS 210grSWC. Accurate Molds also has several good designs if you want more than a 2cav.

[country gent]

If you can get some (10-20) and try them then when you find what you and your fun likes look for that mould bullet style. You will know what you want and then its just finding it.