View Full Version : 45-70 bullets
bigarm
12-19-2014, 06:29 PM
124801
My first big bullets from a few days ago.
MT Chambers
12-19-2014, 06:32 PM
They look good, how'ya gonna size and lube them?
bigarm
12-19-2014, 08:10 PM
Going to powder coat them. I am going to size them with a Lee push through type sizing die, but need to buy one first. I think I was told the rifle they will be used in the bullets were sized to .459.
wquiles
12-20-2014, 12:10 AM
They look good
+1
Do you know the bore dia of your rifle?
Wayne Smith
12-20-2014, 10:26 AM
Going to powder coat them. I am going to size them with a Lee push through type sizing die, but need to buy one first. I think I was told the rifle they will be used in the bullets were sized to .459.
You need to verify that - established with a soft (pure) lead slug measured with a micrometer. Anything short of that gives a less than accurate measure. Do this before you order any sizing die.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.