Molds for 32 S&W and 32 S&W Long?

[Naphtali]

I want a hollow-base wadcutter or severe hollow point wadcutter mold satisfactory for 32 S&W and 32 S&W Long, the HBWC to be seated backwards as I did many years ago with my S&W Model 60. Since I prefer to avoid the expense, I haven't tried to have a custom mold made. The closest I can find "off-the-shelf" is RCBS' 32-098-WC (#82060). Has anyone a mold as I describe? My fall-back is the RCBS mold and a drill press. This is not a very good fall-back, though.

[Outpost75]

Take the RCBS mold and send the blocks to Erik Ohlen at www.hollowpointmold.com and have him do his inset bar conversion.

[John J]

I know its closed but contact him and see if he has any extras on the shelves if this is what your looking for

http://castboolits.gunloads.com/showthread.php?199300-MiHec-4-cavity-brass-32-HBWC-Cramer-Mold

hope this helps

John J