View Full Version : Where to buy?
Knipper
12-07-2014, 11:10 PM
Am starting to pick up tools etc for resizing bullets. I'd like to resize a .323 RCBS bullet down to .322 but can't find a lube and sizing die that size. I guess SAECO makes one, but that means I'll have to buy their setup too, and I was leaning towards an RCBS or LYMAN lube/sizer. I'm starting from scratch here so don't know my way around yet. Lots of time on the internet searching though. I guess that means I'll need a matching top punch for the bullet too. Have settled on an RCBS 08-170-FN which is 8MM, but .322 diameter seems to be the one that is really accurate in my model '94 (1946 made).
Any tips? If I have to go with the SAECO, I guess I can live with that!
Knipper
Pilgrim
12-07-2014, 11:13 PM
If the die you want is not commercially available, Buckshot (search this forum) will make one for you. Fast delivery, good prices. Pilgrim
runfiverun
12-08-2014, 01:05 PM
lathesmith could hook you up too.
I get some of my star sizers from him.
Dusty Bannister
12-08-2014, 01:16 PM
According to information on the vendors list, Lathesmith does NOT make sizer dies for RCBS or Lyman sizers.
http://castboolits.gunloads.com/showthread.php?62874-Lathesmith-s-Star-dies
Check the vendors list section for contact information on other vendors. Dusty
dragonrider
12-08-2014, 01:24 PM
This is a possibility. You will have to lap it out to .322, that can be done.
NEW LUBE & SIZE KIT .314
http://leeprecision.com/images/P/p-176.jpg
Lee .314 Lube and Size Kit lubricates and sizes cast bullets, also seats and crimps gas checks. Fits any standard 7/8x14 thread reloading press.
http://www.leeprecision.com/files/parts/download.jpg (http://leeprecision.com/cgi-data/instruct/BS2003.pdf)
download product instructions (http://leeprecision.com/cgi-data/instruct/BS2003.pdf)
Click here (http://leeprecision.com/parts/bullet-casting/lube-and-sizing-kit/.314-bullet-lube-siz-kit-parts) to view parts
Details
SKU
90044
Weight
0.99 lbs
MSRP:
$26.98
fredj338
12-08-2014, 11:33 PM
Lee will make you any size die you like. I had them make me one in 0423" for sizing down 300gr jsp 44mag, to use in my 404jeffery for plinkers. I do It in two steps; from 0429" to 0.427" then to 0423".
Wayne Smith
12-09-2014, 10:23 AM
Yes, but the Lee sizer does not lube. Buckshot is your man.
dragonrider
12-09-2014, 11:09 AM
I got the impression that he is resizing a J-word so lubing is not in question. He will have to lube the j-word to push it through the sizer. To the OP, have you slugged your barrel yet? Please give us as much info as you can. Personally I do not see a benefit to what you are attempting. But perhaps I have misunderstood your post.
alamogunr
12-09-2014, 04:13 PM
Am starting to pick up tools etc for resizing bullets. I'd like to resize a .323 RCBS bullet down to .322 but can't find a lube and sizing die that size. I guess SAECO makes one, but that means I'll have to buy their setup too, and I was leaning towards an RCBS or LYMAN lube/sizer. I'm starting from scratch here so don't know my way around yet. Lots of time on the internet searching though. I guess that means I'll need a matching top punch for the bullet too. Have settled on an RCBS 08-170-FN which is 8MM, but .322 diameter seems to be the one that is really accurate in my model '94 (1946 made).
Any tips? If I have to go with the SAECO, I guess I can live with that!
Knipper
Those 3 things tell me he is talking cast boolits.
I would go with RCBS or Lyman sizer. I have never ordered from him but I've seen enough recommendations to go to Buckshot if I need a special size die.
WALLNUTT
12-09-2014, 04:43 PM
Buckshot
Green Frog
12-09-2014, 08:57 PM
Lyman has made a .322 sizing die in the past... I've got one. You might get lucky and find one on flea-Bay or one of the gun auction sites. They aren't that expensive when they do show up.
Froggie
fredj338
12-10-2014, 12:05 AM
Yes, but the Lee sizer does not lube. Buckshot is your man.
The op doesn't have or really need a luber/sizer.
muskeg13
12-10-2014, 12:43 AM
Buffalo Arms stocks sizing dies in many odd sizes. http://www.buffaloarms.com/Detail.aspx?PROD=158310&TERM=lubrisizer
.322" Custom Sizing Die f/Lyman/RCBS Lubrisizers
I have several in odd sizes, some from Buffalo, some from RCBS when they offered custom sizing dies. They aren't cheap.
dragonrider
12-12-2014, 12:06 PM
Gotta pay more attention when I read I guess:veryconfu
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.