melloairman
12-04-2014, 10:24 PM
I had installed a shorter spring in the rifle to lower the fill rate and air usage . And I was shooting RB . But between the wind drift and the hassle of always getting the cut in the same place it was a chore to load and get accuracy . Tried some SWC in it today and they are about as accurate as can be at 50 yards at this speed . Was able to drop the regulated pressure down to 2400 psi . Picked up energy , have a 1 1/2 less drift with a 10 mile side wind . But I have a 1 1/2 more drop because of the fps lose . With this low of a regulated psi I can get 200 plus shots out of a 80 cf tank with a start psi of 3400 psi . Think I will try this set up for a while .Marvin
http://i301.photobucket.com/albums/nn55/melloroadman/USED%20201S/IMG_758135720112-4-14_zpse8985206.jpg (http://s301.photobucket.com/user/melloroadman/media/USED%20201S/IMG_758135720112-4-14_zpse8985206.jpg.html)
http://i301.photobucket.com/albums/nn55/melloroadman/USED%20201S/IMG_758135720112-4-14_zpse8985206.jpg (http://s301.photobucket.com/user/melloroadman/media/USED%20201S/IMG_758135720112-4-14_zpse8985206.jpg.html)