View Full Version : 10 gauge recipe wanted
Rkeeper1
12-04-2014, 06:52 PM
Does anyone have a recipe for the 10 with 1 1/8 oz of shot? Or even 1 oz? Wanting it as a clay load just for fun. It'll be pushed out if a single shot so I'm not worried about cycling issues. Could be any shell length. Hopefully its with Remington or cheddite hulls (or full brass) because I can't find federal anywhere
6pt-sika
12-04-2014, 07:13 PM
For 2 7/8" shells .
Remington hull trimmed to 2 7/8"
Remington SP-10 wad
2 - 1/8" thick 16 gauge card wads inside the shotcup
1 - 10 gauge overshot wad
1 1/8 of whatever size shot you prefer
30 grains SR7625
6pt-sika
12-04-2014, 07:15 PM
Some may not agree with this but I load Remington and Federal hulls the same for my double barrel short 10's .
Rkeeper1
12-04-2014, 07:42 PM
Thank you! Its been like pulling teeth to find a load for 1 1/8!
Rkeeper1
12-04-2014, 08:29 PM
Could that load be fold crimped?
Rkeeper1
12-04-2014, 09:02 PM
And a Win209 primer I assume?
Rkeeper1
12-04-2014, 09:06 PM
Well looks like that powder is no longer available...
6pt-sika
12-05-2014, 08:11 PM
Could that load be fold crimped?
Yep I have not gone so far as to do roll crimps yet .
6pt-sika
12-05-2014, 08:12 PM
And a Win209 primer I assume?
I have used WIN209 , CCI209 and CCI209M primers .
6pt-sika
12-05-2014, 08:14 PM
Well looks like that powder is no longer available...
They supposedly imported the last of that powder this year . You can however find it on some dealers shelves still . I think I have about 10 pounds of it so I'll be in good shape for awhile . However at the moment I am using SR7625 for all my 10,12,16, 20 and 28 gauge loads .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.