jlucke69
12-02-2014, 04:38 PM
So, took a model 30g(gun A)out to the range, shot a few rounds and it quit firing. On examination, looks like the pin was not striking the case. If I put a fired case in and dry fire it 3-4 times, you can see where it is striking the proper location. After disassembling it and cleaning everything, I get the same results. I disassembled my other model 30g(gun B) and swapped the inner working, now both guns seem to work, but (gun A) still seems to strike light even with new hammer, mainspring, firing pin and link assembly. (gun B) does not seem to show these signs when used in conjunction with the parts out of (gun A.) Any thoughts or direction would be great.