NOE Moulds Sale

[wch]

End of the year NOE mould sale: 20% off any purchase from the website for one week (11/30 through 12/07).
You apparently have to register with NOE to get a discount code; it can be used once.

[BethelHntr]

That's what I get for buying one on the 28th :lol:

[Echd]

It will be in your mailbox if you don't have it, or are checking on NOE's forums.

Now just to decide what to buy... I've bought several molds the past few weeks, but there is always room for more!

As a suggestion I really wish NOE would stock some of the accessories people purchase with their molds... sizing dies and maybe a small variety of lube types. Sizing dies especially! When I buy a new mold or firearm I don't want to buy a mold then go pay shipping elsewhere for a sizing die too! Same for lube. Probably a very good market for more exact push through dies than the Lee type, too.

Even if they just sold the Lee dies they'd probably sell a blue million of them anyway.

[Ben]

Now is the time to let Ole's Santa add a couple of nice molds to your mold cabinet.

Ben

[JonB_in_Glencoe]

My christmas list included a HBWC for my 38.
Thanks for the generous discount Al.
My first Brass NOE mold was just ordered :)

any of you reading this...be sure to act quick, during his July 4th 2014 sale, he sold out of many popular styles quickly !

[oger]

Already spent the price of a good S&W this morning, very dangerous.

[dlbarr]

Yep, just bought the 4-cavity .460-405-FN mould I'd been waiting to order!

Just occurred to me: do these moulds require his special handles...I have always used Lee handles because of the price and they have worked well on Lyman, RCBS also.

What say you...?

[Beagle333]

Lee handles work fine.

[9w1911]

I am a member of the forum and I did not get an email code :(

I have two mold in my cart too!

[JonB_in_Glencoe]

I am a member of the forum and I did not get an email code :(

I have two mold in my cart too!
Any chance your email spam filter sent Al's email to a "spam/junk" file folder ?

[rockrat]

Great, I bought two on the 23'd.!!!

[cbrick]

Not to sure it's members of this forum that got the email from NOE but rather those that have placed an order with NOE and thus he has your email.

I got the 20% off email . . . 4 days after my last order. :cry:

Rick

[MrWolf]

I was hoping he was going to have a sale soon and luckily he did. I look at it that I basically got handles for free so I just ordered one for my Marlin JM stamped 30/30!

[Artful]

What a time for the freezer to go on the blink and have to get a replacement.
Should have expected it with the Holiday though

[exile]

Is the 20% discount only good on in-stock molds? The mold that I want is not in stock at this time.

exile

[cbrick]

This about everything the flier says. Doesn't say anything about in stock or not. Rick

FOR 1 WEEK ONLY November 30 thru December 7th Get 20% off any purchase from our website

Offer expires 12/7/14 at 11:00 PM MT, and cannot be combined with any other promotional offers. Only 1 discount code may be used on each order. Discount code can only be used once. Not valid on previously placed orders.

[JonB_in_Glencoe]

Is the 20% discount only good on in-stock molds? The mold that I want is not in stock at this time.

exile


This about everything the flier says. Doesn't say anything about in stock or not. Rick

FOR 1 WEEK ONLY November 30 thru December 7th Get 20% off any purchase from our website

Offer expires 12/7/14 at 11:00 PM MT, and cannot be combined with any other promotional offers. Only 1 discount code may be used on each order. Discount code can only be used once. Not valid on previously placed orders.

The email also says,

"FOR 1 WEEK ONLY November 30 thru December 7th Get 20% off any purchase from our website"




FYI, the website won't let you purchase items that show 0 in stock

[9w1911]

Im all over this!! :)

[cbrick]

Im all over this!! :)

:mrgreen: I tried to PM you the code but I couldn't make it happen . . . Your inbox is full. :cry:

Rick

[MTtimberline]

I registered but did not see anything about a sale or receive a code. This would be a great time to purchase on I have been looking at.

[MTtimberline]

I see a purchase being made in the very near future.

[cbrick]

I see a purchase being made in the very near future.

No time like the present. That year end offer is only good for one week.

Rick

[texassako]

I see a purchase being made in the very near future.


I waited a day to long last sale and what I wanted sold out.

Don't forget, Al has more than just molds these days.

[MTtimberline]

I think it will be before the end of the day. Can't decide between 314299 or 316299 for m91/30.

.

[krallstar]

How do you apply the code for the 20% off Found it thanks 269 145Gr. FN 2 cavity GC for my 6.5 Arisaka short rifle

[JonB_in_Glencoe]

How do you apply the code for the 20% off
During the checkout process

[dragon813gt]

Damn it, I just bought two molds. I haven't received an email either :(

[GLL]

NOE's computerized ordering system is almost foolproof BUT somehow I managed to screw it up !
Senility is setting in !

Many thanks to Al for straightening out my error for me in just a matter of minutes !

Jerry

[Nueces]

I tried to checkout using the PayPal link and got to the last page without finding the coupon entry thingy. Had to back up and check out with a credit card. Worth the bother for 4 4-cavity molds. I had selected just three, but the shopping cart had one I had put in months ago. Kinda slick, there, Al, I appreciated the reminder!

[cbrick]

I tried to checkout using the PayPal link and got to the last page without finding the coupon entry thingy. Had to back up and check out with a credit card. Worth the bother for 4 4-cavity molds. I had selected just three, but the shopping cart had one I had put in months ago. Kinda slick, there, Al, I appreciated the reminder!

Doing a little quick math tells me that 20% off an aluminum 4 cav at $100 you should have ordered one more. $20 off each of 5 $100 molds equals a free mold. Free is good. :mrgreen:

Rick

[MrWolf]

Do the regular checkout and apply the code. You can select Paypal from the options then versus jumping straight to paypal where I did not see a spot to apply the code.

[TXGunNut]

Sure hope he did a run of a mould I have on my wish list....BRB. ;-)

[TXGunNut]

Nope, still waiting for a 311414 4 or 5 cav GC. May have to settle for a 2-cav.

[Nueces]

Doing a little quick math tells me that 20% off an aluminum 4 cav at $100 you should have ordered one more. $20 off each of 5 $100 molds equals a free mold. Free is good. :mrgreen:

Rick

I'll be satisfied with three free cavities. :mrgreen:

[TXGunNut]

He's carrying White Label lubes now too! Al's quickly becoming a boolit caster's Larry Potterfield.

[buckwheatpaul]

Dadgumit! I am hopelessly hooked on Al's moulds .... just used the discount ..... all I can say to my better half is: "Baby, it just followed me home and I fed it....you know you can't run it off after you feed it!"

[Alexn20]

Yep! On this like a fat lady on a toilet seat. Love the NOE moulds!!

[MTtimberline]

The newest NOE addition to my mold collection is on it's way! Merry Early Christmas.

[Anonym]

Hmm, I didn't get the code either and am registered with a mold in my shopping cart! Anyone care to share the wealth?

[JonB_in_Glencoe]

Hmm, I didn't get the code either and am registered with a mold in my shopping cart! Anyone care to share the wealth?
Your best bet is to email Al directly or PM him through the NOE forum.

I believe the codes in the emails are all different, and each one is only good for one purchase, then rendered ineffective by the website for any other purchases.

[Anonym]

Thanks, JonB. I'll give him a shout.

[Bucking the Tiger]

I am happy to have gotten an email from NOE telling me of this sale. I signed up on their email list.
They had a similar sale during the 4th of July, which I purchased a 4 cavity 460 405gr for the 45-70. Love it!
I bought the 4 cavity 350gr 460 hollow point mould this time. Have owned the 5 cavity 460350 for a while and it shoots beautifully out of my Marlin 1895.
The selection has dropped rapidly. A top quality mould for 20% off? Hell yes!
Love NOE and have been pleased every time.

[bdicki]

311 165Gr.RF RG2 cavity GC (RD) Brass

[wquiles]

Thanks, JonB. I'll give him a shout.

I just did the same. Sent him a PM just now. Maybe I can still get a mold :)

[SwedeNelson]

Have a code just for the Guy's here at CastBoolits!
http://castboolits.gunloads.com/showthread.php?261270-NOE-end-of-year-sale-20-off-(code)

Bullet maker, maker
Swede Nelson

[wquiles]

Have a code just for the Guy's here at CastBoolits!
http://castboolits.gunloads.com/showthread.php?261270-NOE-end-of-year-sale-20-off-(code)

Bullet maker, maker
Swede Nelson

Thank you Al :-)

[John Boy]

Post a "I want" and receive a 15% discount off the website
We will PM a discount code for you to use at check out
http://noebulletmolds.com/smf/index.php/topic,16.0.html

[krallstar]

Ordered sunday night, Arrived wednesday east coast by 2:00 Thanks Swede Nelson

[9w1911]

I got in on this! :)
one 311 155 GC Hp and a 452 198 swc

[GRid.1569]

I was thinking about ordering ahead of my next trip stateside but saw this and jumped onboard... ordered last night shipping confirmation in my inbox this morning... Excellent Service...

Just need to hope the customs guys are asleep when it arrives (and I'll save another 20%+ )

[9w1911]

ordered yesterday
shipped today
:)

[edctexas]

Great time to fill my stocking. Replacing my last two working lee molds with molds that work every time. And added two more to my small collection. I am just so impressed with the difference in quality between NOE and the others (RCBS,Lyman, and Lee). Hot that these don't work. The NOE molds don't have such different personalities and operating idiosyncrasies. Well behaved!

Thanks Ed C

[mattw]

Just ordered my first.. 2C 360-160 HP. Can't wait!

[echo154]

RATS!!!!!! I just bought two molds, gas checks, top punches........shoulda waited a couple days......oh well. :violin:

[dragon813gt]

Well they got a other one out of me ;)

[Alexn20]

Got My mold yesterday. Its pretty enough to frame on the wall. Very impressive!

Time to dust off the ingots and fire up the lead pot.

Life is good!

I am tempted to get another one. or two. or 3.... >_<

[Intel6]

I was planning on buying a few moulds but went in and the ones I was interested in are out of stock. I was planning on adding some puc=nches and gas checks but without the moulds to order I am not going to order anything.

[Bohica793]

Took this opportunity to upgrade my 453-200SWC to a 4 banger. Ordered Sunday, arrived Tuesday. Thanks AL!

[shoot-n-lead]

Finally remembered to get my order in...now...the wait begins.

[wquiles]

My NOE mold (432-265gr) arrived today :bigsmyl2:

[dragon813gt]

I got mine as well. I forget what day I ordered it. Think it was Thursday or Friday. Thanks Al :)
http://i198.photobucket.com/albums/aa39/dragon813gt/TimeToMakeAmmo/D2B95B1C-A09A-4F69-A3AC-D22797BA2EB2.jpg (http://s198.photobucket.com/user/dragon813gt/media/TimeToMakeAmmo/D2B95B1C-A09A-4F69-A3AC-D22797BA2EB2.jpg.html)

I bought their gas check seating die as well. Quality is superb and it's a slick piece of tooling.

[9w1911]

Got mine Saturday ordered on Tuesday,
then I ordered another.

[osteodoc08]

I squandered my time with work and this slipped my mind. Ugh. Oh well. I'll just have to pony up the $$$ after next payday for a mold or 2.

[TXGunNut]

Missed out on this great sale as well. Al's out of stock on the mould I'm interested in but I'm in no hurry. Have plenty of other moulds waiting to see some action so that project can wait.

[bdicki]

I received another email with a 15% off offer.

[JonB_in_Glencoe]

I received another email with a 15% off offer.
yeah, that is just for molds in the website's "SPECIALS" section.
This week it is the...
403 180Gr. WFN
403 200Gr. WFN

Last week there were some 358 molds in there.

It's good to surf through Al's website on occasion, ya never know what's gonna be listed.

[ProfGAB101]

Seems I always find out about the great sales... right after they have ended. :|

[shoot-n-lead]

Talked with Al Monday morning...got my mold on Wednesday morning, all the way across the country. Great service....thanks, Al.

[mattw]

Has anyone tried the 403 200Gr. WFN in a 10mm?

[TXGunNut]

Has anyone tried the 403 200Gr. WFN in a 10mm?

Nope, kicked it around as an excuse to hasten the day I buy a 38-40 but was able to restrain myself. Looks to me like a fine boolit for the 10mm or the 40 S&W but I don't presently load or cast for either.
Send Al an e-mail and ask.