Mould Lube

[bobthewelder]

So, now I need to buy a special lube to put between the Lee mould plates? I have bullet lube, is there a substitute or commonly found effective lube to go between the plates and the peg holes?

[mtgrs737]

Bull shop's Bull Plate is an excellent mould lube. I won't cast without it! Click on the Bull Shop Icon at the bottom of this page to order.

[mroliver77]

You can use boolit lube on you molds Bob. Just the tiniest bit on the alignment pins and a smidgen on the sprue plate screw. I use a tiny scewdriver to shave a bit of lube off. I touch the pins briefly and the pivot screw on the top of the sprue plate. It is very easy to overdo it. LBT sells a lube for this that is beeswax with graphite in it.
J

[Buckshot]

..............Get some Bullplate lube. Read the instructions and live in bliss for ever after, amen.

............Buckshot

[Lloyd Smale]

Im a new convert to bullshop mold lube and woulnd be without it again.