salpal48
11-17-2014, 11:22 PM
I purchase my Vibra prime a while ago. it has worked as described for my dillon. When I don't use the Dillon I am again Back with the standard method of Tube filling
.. I use only Older single stage presses, Lyman AA, texan. Herters. I started Trying to Use the vibra Prime to use with these older machines. I found that if you use the tube straight in the auto feeder most bind or not alined.
I was able to use a series of O RINGS TO STABILIZED the tube on to of the Feeder. The lyman AA was the simplest to change . spacing the tube was the Key. . The texan was a bit more complicated. . since the original tube is some what different. The result was the same the O ring of different amount. feed in the Texan . > I found You can fill the tube in Place and remove the Vibra prime or leave it in Place and just fill the tray
Has anyone Done the same or attempted
Sal
.. I use only Older single stage presses, Lyman AA, texan. Herters. I started Trying to Use the vibra Prime to use with these older machines. I found that if you use the tube straight in the auto feeder most bind or not alined.
I was able to use a series of O RINGS TO STABILIZED the tube on to of the Feeder. The lyman AA was the simplest to change . spacing the tube was the Key. . The texan was a bit more complicated. . since the original tube is some what different. The result was the same the O ring of different amount. feed in the Texan . > I found You can fill the tube in Place and remove the Vibra prime or leave it in Place and just fill the tray
Has anyone Done the same or attempted
Sal