Replacement Hopper for Ohaus Duo-Matic Powder Measure?

[Maven]

Does anyone know of a source for a spare hopper (looks sort of like a tapered beaker/graduated cylinder or even a Pilsener glass) for this obsolete, but otherwise perfect powder measure? The inside diameter of the housing/collar is 3/4". RCBS no longer has parts for these measures, but they will offer a trade-in for a Uniflow PM, which I don't want, mostly because the Ohaus is the only measure I own that will handle IMR 5010. Thanks in advance for your help!


P.S. I'm off to Lowe's to see if I can find a copper pipe fitting that fits the collar. If so, I can cobble up an empty plastic soda, water, etc. bottle to fit and serve as a hopper of sorts.

[lovedogs]

How about fashioning one out of pieces of plastic PVC pipe? You could make it about any size you want and also make it as tall and as large as you want by fitting a piece then adding others of whatever diameter you wanted.

[Maven]

lovedogs, I found a 3/4" copper fitting with a female adapter (threaded) that was a near perfect match to the powder measure. A bit of electrician's tape and a cut-down Diet Coke bottle forced into the fitting's threads now serves as a hopper. I finished testing it not 10 mins. ago and it works beautifully. With ball powders, in this case WC 860, the Ohaus PM is as accurate as my Bonanza (Forster) Bench Rest measure (also with WC 860). It seems we were on the same wavelength and thanks for your suggestion!

[1hole]

Maven, I just saw a photo of a powder measure sold by Forster that, to my eye, looks identical to the old Ohaus measures. Give them a call to see if I'm right and, if I am, how to get a new hopper.

[Maven]

1hole, Will do and thanks for the tip!

[Hackleback]

you can buy lexan or plexiglass tubing of just about any size, you would need to come up with a base (reducer)

[o6Patient]

I did use a 3/4 copper female adapter for mine and a plastic hopper for a paint gun; heated the plastic and fitting enough to make my own threads from the female threaded end of the fitting onto the hopper base. I then drilled a larger hole in the metal washer that was at the inside base of the hopper. It looks as if it were factory made and is at least 5 times stronger than the original and functions flawlessly, metering the powder as well or better than some high end (price) measures. [smilie=p:

[milprileb]

Mine is kaput as well. I found the plastic (clear plastic) bottle that Walmart cheapo alcohol
comes in is ideal. Fits Ohaus opening on base perfectly. I drilled a hole in bottom of bottle and put in a 20 cent Ace Hardware rubber cork. Pull cork, fill powder through a funnel into bottle and you are ready to use measure.

been working fine for 3 yrs. Holds as much as original Ohaus hopper.

[Green Frog]

Mine is kaput as well. I found the plastic (clear plastic) bottle that Walmart cheapo alcohol
comes in is ideal. Fits Ohaus opening on base perfectly. I drilled a hole in bottom of bottle and put in a 20 cent Ace Hardware rubber cork. Pull cork, fill powder through a funnel into bottle and you are ready to use measure.

been working fine for 3 yrs. Holds as much as original Ohaus hopper.

Could you post a picture of this please? I've got a perfectly good, otherwise complete, green Du-O-Matic (early production from RCBS?) that has been sitting around gathering rust and dust for lack of the hopper. [smilie=b:


I did use a 3/4 copper female adapter for mine and a plastic hopper for a paint gun; heated the plastic and fitting enough to make my own threads from the female threaded end of the fitting onto the hopper base. I then drilled a larger hole in the metal washer that was at the inside base of the hopper. It looks as if it were factory made and is at least 5 times stronger than the original and functions flawlessly, metering the powder as well or better than some high end (price) measures.

Ditto to above... how does the 3/4 copper female adapter attach? Is it a friction fit into the neck at the base of the reservoir casting? Pictures would be most appreciated. :coffeecom

Froggie

[Pressman]

The RCBS and Ohaus both have a 1 inch ID opening for the hopper. The Bonanza mentioned above has a 5/8 inch opening, this is for both of their measures. The Tecto/Pacific has a 3/4 inch opening.

I have not been to a cooking store but it may be possible to find a funnel with a 1 inch OD neck. Don't laugh, the original Ideal Armory measure from 1900 used a funnel shaped hopper so it is not an original idea.

Ken

[Maven]

Green Frog, I simply took the Du-O-Measure (old Ohaus, tan color) to the plumbing section of Lowes and searched for a Cu fitting that was a close slip fit into the opening. A few wraps of elecrician's tape (sorry for mixing crafts!) + the set screw on the measure itself hold it in place reasonably well. The new "hopper" is a 16 oz. Coke bottle (brand not important) with the base cut off and the threaded end pushed into the opening. Btw, the bottom of my measure housing didn't have the green plastic housing that you'd hold an empty cartridge against in order to charge it [and not spill powder]. I asked RCBS to send me 2, which they did. I needed to drill out the base with a 7/16" drill bit in order to insert it, but yours may be different.

[lead-1]

I totally agree that RCBS should make a replacement hopper, this is my favorite measure to use. I like my LEE but the OHAUS is my first choice. I made mine usable for a while longer with a 20 oz. Sprite bottle. I shaved a little off the threads so it fit snug into the hopper then cut a slot for the locater, the rubberband is to hold the bottom of the bottle (that is now the lid) down.

http://castboolits.gunloads.com/attachment.php?attachmentid=16504&d=1256191603

[bbqncigars]

I shaved the male threads down on a MEC powder baffle and glued it to the measure. I use one of the standard MEC powder bottles screwed into the baffle. Works like a charm.

[milprileb]

I was on the Mec track like bbqncigars illustrated till I found this bottle of Walmart alcohol almost used up in the house and it fit like a glove in the O Haus powder measure. I did copy the plug idea that Mec uses on their bottles and got a plug from Ace hardware for 20 cents.

The Sprite bottle is bigger than my bottle (which holds a pound of powder) so thats a option for larger capacity hopper if one is interested.

The Mec bottle idea allows screwing in replacement bottles if that is a feature you desire. I just pull plug from top of my bottle hopper and use funnel to refill it and its quick. Change out of powder is loosen set screws in base and unscrew bottle from measure and empty it. Same drill as Mec bottles.

A good recon of the house and bottles of stuff might yield a good solution. The Mec idea allows purchase of known parts that will work.

I had wondered if the Lee powder hoppers and Forster hoppers could be adapted but never got that far. Did anyone go that route ?

[Pressman]

I don't have a Lee measure but the neck of the Forster is way too small to fit.
Ken

[dragonrider]

I adapted a hopper from a Lee perfect powder measure to fit an Ohaus measure using a piece of pvc pipe. The pvc fit into the measure and the hopper fit into the pvc.

[o6Patient]

Green Frog;
(Sorry it took so long to answer your question but it was an old thread when I posted I didn't think anyone would follow up...now I know better,http://castboolits.gunloads.com/images/smilies/icon_wink.gif but I have been distracted with stuff.)
The screws that hold the original plastic thing are utilized and threaded right into the copper, obviously two holes need to be drilled. I found different length threaded female adapters and used the longer one so as to give handle clearance and make the secondary chamber this setup created via the baffle at the bottom of hopper, a little bigger.
I am between houses right now and my reloading equipment is packed away at the bottom of the back room- should have been moved a year ago but we have had major mission creep. If I get a chance I will dig out this particular item and have my daughter re educate me enough to post some pics. http://castboolits.gunloads.com/images/smilies/killpc.gif

[OuchHot!]

I figured if mine broke, that I would try to cast the cap of a bottle into a plug of acraglass to fit the measure body. Then use the bottle as the reservoir. The copper fitting might be quicker. I've been lucky, mine is an old tan measure and it is a miracle I haven't broken it. I cut the spigot off an aluminum funnel and set that in the top as a powder baffle. It is a good measure!

[o6Patient]

I have the reservoir but it is so ill fitting I put it aside and built a good one so my heirs can sell it ebay. I have a rcbs duo that the plastic is also shrunk and brittle even though it is serviceable. Speaking of the flea bay; I put a bid in on an old ohaus duo w/ stand. From the picture I could see the small piston was missing and it had no drop tubes or reservoir and the outside wasn't cleaned up particularly well but put a bid in just for a "parts" machine. Long story short: it arrived very well packaged, and the other parts that are there are perfect and the fit of the cylinder to the housing is like new and pristine, better than mine which is very good. All other screws etc all fine as well. Paid very short money for what I got..some times you get lucky. So now I'll be able to use duo's way into the foreseeable future and combined with my mulls' can load most anything w/ minimal trickling.

[o6Patient]

Here are the pics as promised for Ohaus Duo-Measure hopper57181571825718357184571855718657187571885718 957190

[jleonardindy]

My Duo-Measure also needs a hopper and drop tubes. I think adapting a different powder hopper to it might be the best answer so I can install a baffle that works. I'll work on that real soon, as I miss using this unit, even after only three times! It is by far more accurate than the Lyman 55, and I really like the small cylinder for my pistol loads.

[OuchHot!]

Lee or someone like that makes a funnel with interchangeable drop tubes that are not too far from what my ohaus duomeasure uses. Maybe you could adapt those drops tubes? They are red clear plastic....I'm at work now and cannot check to see what brand and how they fit...will try later.

[AZ Pete]

Nicely done o6Patient. If I had seen that a couple of years ago, I wouldn't have sold my DuoMeasure. It was really handy for developing pistol loads, then switching back to rifle. The cracked reservoir, and no factory replacement available, led me to sell it.

[Maven]

Update as I see the thread has been resurrected: 06Patient's solution (post #20) is excellent and I would change my plastic Coke bottle in a second if I had such a container. (Now I have something to search for!) As for the Coke bottle, it works but is flimsy and should be replaced with a stiffer container. Other than this minor inconvenience, I find it to be an excellent and accurate powder measure.

[unclebill]

i just broke my green hopper
did a google search for parts and got here of all places!
;)

lots of good usable ideas
thanks as always

[bbqncigars]

I replaced my broken hopper with a MEC powder bottle and an inline baffle that is permanently glued to the measure. You can see one at the far right of the picture.
111114

[pjames32]

I've broken the powder hopper and drop tubes on my old Ohaus duo measure. While searching I found this post on another forum. I'll be trying this since this is my "go to" measure and I don't want to replace it.
http://forums.gunboards.com/showthread.php?605273-Ohaus-powder-measure-rebuild

[salpal48]

An almost Perfect for the Ohaus Is the Lee Red Powder Hopper. . One Turn on the Ohaus Lock screw sets it. If your Using with the Small valve No modification is Necessary. Set the drop Hole over the Powder Hole and Done. You can expand the Lee powder Hole By removing Plastic with a Blade. and Then suitable for Rifle or the Large Powder drop. There Cheap enough I bought 1 for each. Nothing else Needed

[salpal48]

Enclosed photo Of my Lee/ duo Measure. The first Photo Has amodified Drop Tube using a lee drop tuba as wee. The other Just has the hopper. Both mounted Off press on My Texans 3

[pjames32]

Salpal thanks for the tip.