SniderBoomer
10-16-2014, 04:31 PM
I got an old RCBS Lube-A-Matic and cleaned it up and filled with fresh lube.
Problem is, the die locking-nut, when screwing it down on a die, it seems to come to a firm stop long before the edge of the nut gets near the Luber main body.
See image - this is as far as I can turn the lock-nut down.
http://i57.tinypic.com/doxkdi.jpg
I am having trouble with getting lube into the top grooves, as if the die needs to see a bit deeper.
Those of you with original Lube-A-Matics - does this lock-nut height, being deep as I can get it - look right?
Problem is, the die locking-nut, when screwing it down on a die, it seems to come to a firm stop long before the edge of the nut gets near the Luber main body.
See image - this is as far as I can turn the lock-nut down.
http://i57.tinypic.com/doxkdi.jpg
I am having trouble with getting lube into the top grooves, as if the die needs to see a bit deeper.
Those of you with original Lube-A-Matics - does this lock-nut height, being deep as I can get it - look right?