View Full Version : 30-30 .311-041 & 28grns H4895 ???
Gun Nut
10-12-2014, 10:36 AM
From everything ive read of internet says im near max but just want to be safe. All my books show nothing for a 173 grain flat nose gc boolit using H4895. Any body got it in there books? I pulled this off here last night.118922
castshooter-too
10-12-2014, 10:42 AM
start at 20 grs. and see the results on paper then work up.
crono?
Gun Nut
10-12-2014, 10:51 AM
No chrono available
two of you here are trying to go up the same tree.
http://castboolits.gunloads.com/showthread.php?256284-30-30-and-H4895-Help
http://www.hodgdonreloading.com/data/rifle
.30/30 Guy
10-12-2014, 04:06 PM
I use 27.5 or 28.0 grains of 4895 under boolits ranging from 150 to 180 grains in my 30/30's.
rintinglen
10-12-2014, 08:47 PM
Hogdon lists a max of 31.7 grains with a 170 grain JSP. My 45th edition Lyman Reloading Handbook lists 29.5 grains as max with a 170 JSP. My 14th Edition Speer says 29.0 is tops. A more modern Lyman Manual says 28.0 grains max.
Your 28.0 grain load should be safe, but I would go no higher unless and until you get a chronograph. If this is a hunting load then I am on board with it, but for plinking and or practice I'd be more inclined to run 25-26 grains.
Gun Nut
10-12-2014, 09:25 PM
Thanks guys,load shot fine with no pressure signs. But the 3031 had a beter grouping. These are hunting loads.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.