Lee FCD for 32win spl,???

[minmax]

I thought they used to list them. I can't seem to find one.
Can I use the FCD for the 30-30 and ream it out?
Any one try? I have the RCBS Cowboy Die set with a separate seat/crimp step. I shoot cast with small charge of pistol powders for reduced loads. I get bullet setback sometimes with full house loads. thanks..

[Guesser]

I use my 30-30 FCD. It just has to be adjusted to get the crimp you want. Works well.

[EDG]

http://leeprecision.com/custom-factory-crimp-die-overruns/

There are .32-40 and .32 Remingtons listed in the overruns.
One of those could be modified for your .32 Special.

[Guesser]

No mods required to use the 30-30 FCD, just adjust its position in the press, up or down, thats all.

[Jon K]

They make one for 32SP, I just bought one a few months ago. I can't remember if it was from Midway, or Buffalo Arms. I use it on the 32-40.

Jon

[Kevinakaq]

In stock at Midway for 13 bucks. They also recently dropped their shipping prices so you can prob get it to your door for only a few more dollars.

http://www.midwayusa.com/product/133420/lee-factory-crimp-die-32-winchester-special

[minmax]

Thanks for all the replies! I checked midway awhile back with no luck. I should have before my post.

[hiram]

You might be able to try an 8mm collet, if Lee makes one in a 30-30 body.