30-30 Lee Loader

[swatson]

I picked up a 30-30 lee loader at a flea market, but it is missing the data sheet. Does anyone out there have one for the 2.2 cc dipper they would be willing to send me a copy of? I don't get to this site very often, so I would appreciate if you would email me at barbsam418@gmail.com

Thanks!

Sam

P.S. I also need 7x57 (2.8 cc), 22 hornet (.7 cc), and 30-06 (3.4 cc)

I would be willing to share: 30 M1 (1.0 cc), 25-35 Win. (#108), .303 British (2.8 cc), 30-40 Krag (2.8 cc), 6mm/.244 (2.8 cc), 45-70 (3.1 cc), 12 Ga 2&3/4" (#141 photo copy), .45 long colt (.7 cc), 6.5 Japanese (2.2 cc), .44 Mag (1.0 cc), .38 S&W (.3 cc), 7.7 Japanese (2.8 cc), 300 Win Mag (4.3 cc)

[IDSS]

Here's Lee's chart for capacities of all their dippers with all the powders:

http://www.leeprecision.com/cgi-data/instruct/Dippers.pdf

[swatson]

Thanks Buddy, that's great, but I would still like to have the "factory chart". I was going to order one from Lee for $1.00 until I saw the shipping charge was $8.00!

Sam

[gwpercle]

Thanks IDSS, I use the Lee dippers a lot and have the cardboard sliding dipper/powder slide rule thing but this printed chart is going to get copied , folded and stuffed into my reloading gear bag for when I'm away from my bench. I have found I can get a lot of reloading done at my office desk and will carry it my " reloading bag" Very nice to have and much appreciated.
Gary

[William Yanda]

I suspect FS Reloading or Titan, authorized Lee distributors might have a better deal on shipping.
Regards
Bill

[mexicanjoe]

If I can figure out how to send a pic I will try to get it to you soonest.... Wish me luck!

[prsman23]

http://tapatalk.imageshack.com/v2/14/10/18/af4ee86c4f8707c6bf54b7a362675fdf.jpg

This one is from the 60's. No idea how up to date it is.

[barrabruce]

well nobel. powder I ain't seen since about the early 80's.
that is for the red colored dippers.

if you got a scale then find your load and make one out of a spent case.
thatS what I do.
i do have a few lee dippers but use them to precharge my scales before I trickle my powder in.

[swatson]

Thanks to all of the respondents to my inquiry. I now have loading data for three different dippers all of which I possess. Anyone have the Hornet, 7x57, or '06 charts?

Sam

[G. Blessing]

Thanks to all of the respondents to my inquiry. I now have loading data for three different dippers all of which I possess. Anyone have the Hornet, 7x57, or '06 charts?

Sam

I've got the '06, will try to get a good picture and email/post it later today! :)