primersp
10-08-2014, 11:52 AM
hellois the rcbs and dillon primer feed tube are compatibles ?thanks.ANDRE
Dan Cash
10-16-2014, 12:18 PM
Short answer is yes. You will need to drill a hole for the cotter pin/hair pin retainer about 1/2 inch up the tube from the stock location in the Dillon tube but the tube will work just fine. Redding tubes will work with out modification. I just tried them on one of my presses.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.