New Lee mould 90307

[iwottopq]

Hello to all.
In the 2014 lee catalog there is a new mould, the 90307, TL309-230-5R that is named as "Best subsonic requires fast twist rifling". Anyone know this boolit??? How it is???
Thanks in advance.
Nino

[sdcitizen]

It's really meant for the 300 blackout, some folks report success. On most molds the nose runs undersize, mine is .295, seems .297-.298 is common. I have had difficulty in getting it accurate out of a 8 twist 30BO carbine. Works great with a gas check in 1919a4 though.

[iwottopq]

Hello sdcitizen and thanks for the reply. If the booliot out of the moud can I use this for the italian 7,35 that is a true .300 caliber...
This is very interesting...
Nino

[paul edward]

Hello sdcitizen and thanks for the reply. If the booliot out of the moud can I use this for the italian 7,35 that is a true .300 caliber...
This is very interesting...
Nino

He was referring to the nose of the bullet, the part that rides on the bore diameter. The back part of this boolit will have a diameter of .309 to .310". This is too big for the 7.35mm Mannlicher Carcano. You need a boolit with a .300 or .301" diameter.

[iwottopq]

Hello Paul...opsss...my english is really so bad...!!!
Thanks. It is so hard to find a mould for the 7,35 carcano...!!!
Ciao
Nino