BNE
09-20-2014, 10:07 PM
OK, I have read multiple powder coating threads, but I have not seen this topic covered. If it is, I am truly sorry to repeat....
I want to step up and get a mould from Accurate Molds. I also want to powder coat.
My .45ACP bore measures 0.4515".
I will be using 50/50 COWW / Pure plus 2% Tin for alloy.
What diameter should I ask for? 0.450", 0.451" 0.452" or something else?
I also still use a push through sizer. (Currently it is 0.452")
Thanks for your help.
I want to step up and get a mould from Accurate Molds. I also want to powder coat.
My .45ACP bore measures 0.4515".
I will be using 50/50 COWW / Pure plus 2% Tin for alloy.
What diameter should I ask for? 0.450", 0.451" 0.452" or something else?
I also still use a push through sizer. (Currently it is 0.452")
Thanks for your help.