View Full Version : 480 ruger
dragonfire
01-31-2008, 06:08 AM
Who makes a sizer die for the 476 cast bullet , every thing i own is lee and it doesnt look like lee makes one unless you have it made ,i plan on reloading for a 480 ruger ,but its not looking good so far.
475/480
01-31-2008, 07:53 AM
Lyman, RCBS for the Lyman 4500,RCBS lubresizer
Sean
44man
01-31-2008, 08:54 AM
I have one for my RCBS but also had Lee make me one. Cheapest way to go if you don't have a lube-sizer.
racepres
01-31-2008, 10:38 AM
Then again, my friend just made some 480's and simply LLA'd 'em and shot 'em, "as cast".. in his Encore, it worked extremely well!!! MV
dragonfire
01-31-2008, 12:19 PM
I dont own a lubesizer or anything like that ,i might have to have lee make me one ,dont want to buy alot of stuff just for this one bullet
44man
01-31-2008, 07:40 PM
I just use it to remove excess lube. I rub Felix into the grooves by hand and run through the sizer.
If you find a piece of tubing a tad smaller and lap it out so a boolit just slides through, it will work. If you are putting on gas checks, you need a sizer though.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.