Would this beast fit a 9mm round?

[jayjay1]

http://www.accuratemolds.com/bullet_detail.php?bullet=35-168Z-D.png

[tazman]

yes, but you will have very little room for powder. Could be difficult to load for in a 9mm.

[jayjay1]

Yeah, especially with my dang short chamber....
:(


Thank you.

[EdS]

You may also run into another problem, the base of the boolet seating deep enough in the case to expand the loaded round diameter to where it won't chamber. This has happened to me with a couple of cast numbers in my 9mms. -Ed

[6bg6ga]

I'm using a 38/357 bullet that is a round nose 160 GR that measures .742 for length. I'm using them in 9mm cases with 3.1-3.4 grains of Unique powder and its a compressed load. No signs of pressure at all and they feed and function correctly. I'm sizing at .357 with a Star sizer.

[6bg6ga]

The 160 is a long bullet too. 115528