View Full Version : Dedicated 30/30 Mold
frnkeore
08-30-2014, 01:00 AM
Check this mold out. It's designed JUST for the SAAMI 30/30 chamber and COAL.
http://noebulletmolds.com/smf/index.php/topic,306.0.html
There are already 4 buyers and we need 6 more to run it.
I know of no other mold that is made in this way to fit the 30/30 chamber.
Frank
Yodogsandman
08-30-2014, 01:21 AM
Is there a technical drawing available to see? I don't have the dimensions of something like the 311241. What are the improvements over the 311291 or 311041?
frnkeore
08-30-2014, 01:56 AM
If you click on the link, you can read the details and then click on the drawings, you should see both a drawing of a GC and a PB version. The bullet isn't really like any of the three bullets that you list but, the 311041 would be the closest.
Frank
Yodogsandman
08-30-2014, 02:20 AM
My view doesn't have any drawings to click on.
dromia
08-30-2014, 02:44 AM
Link works fine for me.
Drawings are at the bottom of the first post.
I have to say I'm tempted with it.
WILCO
08-30-2014, 03:14 AM
My view doesn't have any drawings to click on.
Same here.
WILCO
08-30-2014, 03:15 AM
I have to say I'm tempted with it.
You'll feel better as soon as you open your wallet! :mrgreen:
dromia
08-30-2014, 06:09 AM
Not sure if this is the reason but perhaps you need to be logged onto the NOE forum to see the images.
Hardcast416taylor
08-30-2014, 02:52 PM
I had to go to their website to see the diagram of each style. I made up my feeble mind and committed to an order.Robert
frnkeore
08-30-2014, 03:32 PM
For those that can't view the drawings.
114954114956
Doc Highwall
08-30-2014, 05:41 PM
I like the Ranch Dog version that NOE made for a 30-30 bullet with a large flat nose for killing power.
frnkeore
09-01-2014, 12:24 AM
This mold is now a reality. You can sign up for it on the "Active Group buy" thread now.
http://noebulletmolds.com/smf/index.php/topic,314.0.html
Frank
44man
09-02-2014, 03:22 PM
Made my own mold, .301" ogive and .311" drive. Shoots under 1" at 100 and has done 5/16". I would give NOE some boolits to copy. That boolit looks close but I have a larger meplat. It is 187 gr.115322
44man
09-02-2014, 03:31 PM
Close up of my boolit.115323
44man
09-02-2014, 04:05 PM
Free to all. No drawings, need a boolit to copy. The can shown has 3 shots in the hole, no other boolit I have can do that. Has anyone shot cast like that from a Marlin at 100 yards? Some consider me a crazy old coot but nobody makes a revolver shoot like I do either.
I make a cherry by eyeball and cut a mold to get crazy small groups. My .44, 45-70, .475 and .500 JRH boolits have never been equaled. and now the 30-30.
Some of my boolits might become a reality from a mold maker. Maybe not here
I will give them to copy but don't think you know better and change them.
reloader28
09-03-2014, 09:27 PM
This NOE boolit looks alot like the RCBS SP 150 that I have.
I crimp in the top lube groove and shoots great in both my 30-30's.
Drops at 160gr.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.