Lyman 311441: Anyone tried it?

[35 Whelen]

Ran up to the local gun show yestiddy and found a gentleman with lots of moulds! He had lots of pistol moulds, but I'm pretty well set with pistol moulds. But I found this 311441. It's a hollowpoint mould that someone's welded or brazed a piece of rod into to make it a flatpoint. The bullets look like a truncated design, but it's an old design as I found reference to it in my Dads old Lyman manual (circa 1957) I cast a hundred or so and they come out at about 117 grs. and roughly .313" x .314" with wheelweights. They ought to be OK in my Enfield & Mosins. Anyone shot any of these? Thanks,
35W