32 winchester special mold

[hound13]

does anyone make a mold for 32 win spl lever 94 im looking to make some cast bullets have you got some ideas for me thanks >>>> sorry i put it in the wrong place.......hound13

[Bullshop]

We have a couple, one from NEI and one from LBT. If Ranch Dog made one we have that too because we have one of each of his designs.

[minmax]

Hey Hound, I use cast boolits for 32-40 170gn flat base. With load data for 30-30. Did have to adjust sight a little from jacketed factory rounds. Noe and Accurate moulds seem good!

[Dutchman]

http://gardnerscache.com/32win_spl_170_lfp_g_c.html

R.C.B.S. MOLD,#08170 FN,170 GRAIN HARD CAST LEAD FLATNOSE COPPER GAS CHECKED BULLET.SIZED AT .321"

[nekshot]

my rcbs170-32 casts them with perfection!

[TXGunNut]

Ranch Dog had the 323-180, it is a little fat in the nose for a couple of older 94's I tried it in. Works great in my 1969 vintage 94, not sure if NOE is carrying that design. NOE has a 322-180 that has a bit smaller nose, just got that one in a few weeks ago and it's warming up for it's initial casting session as I type....peck. ;-) The NOE 322-180 is available in a plain-base design and for the velocities I'm looking for that will suit me just fine.

[TXGunNut]

322-180 didn't work out for my rifle, see my "Stop Ring" thread. How old is your rifle? Seems the older ones (1920's & 30's?) have a very short leade.

[ohland]

my rcbs 170-32 casts them with perfection!

I love the way my 357-180-SIL casts. The 32-170-FN would be another fine mold that I lust for. If you need a little fatter boolit, czech out the RCBS 8mm-170-FN.