32 winchester special mold

[hound13]

does anyone make a mold for 32 win spl lever 94 im looking to make some cast bullets have you got some ideas for me thanks >>>>hound13:-P

[Scharfschuetze]

The RCBS 32-170-FN is specifically for the 32 Special and the 32 Remington. It is a flat point, gas check design.

Lyman's 32/40 mold, 319247, a 165 grain plain base, flat point design, also works well.

[osteodoc08]

Look at Accurate's 323170C

[hound13]

thanks for the info hound13

[Green Frog]

Back in the day, the old Ideal 321262 was pretty well liked for both 32-40 & 32 Win Spl if you can round one up.

Froggie

[bruce drake]

If you are a reloader on a budget, LEE's 170gr 8mm round nose can be used as well in your 32 Winchester Special. I cut the gas check off of my older LEE single cavity mold and it drops at 175gr which is good weight for that cartridge and at 1600fps still drops them on target at 100 yards.

[sundog]

And one other, if you find one, is the Ranch Dog TLC323-180-RF (http://ranchdogoutdoors.com/).

[Djones]

And one other, if you find one, is the Ranch Dog TLC323-180-RF (http://ranchdogoutdoors.com/).

NOE has their clone in stock