IcerUSA
01-26-2008, 07:03 PM
Well I fially got it to cast some decient boolits and here they are , the 2 32WS cases are not loaded , just checking the fit and it's a charm cycling and extracting , just need some warmer weather and a chance to get to the range . :)
Ran the boolits thru a .322 push thru sizer and I checked the weight and the average is 151gns .
6126
6127
6128
Just a little more work on the mould to get a better drop from the cavities and this is going to be a very good mould , hope a couple more casting sessions will help the dropout rate , we'll see .
Again a BIG thanks to Cat and 45 2.1 for doing this .
Keith
PS , sorry bout the bad pics as my camera isn't the best for close up shots . :(
Ran the boolits thru a .322 push thru sizer and I checked the weight and the average is 151gns .
6126
6127
6128
Just a little more work on the mould to get a better drop from the cavities and this is going to be a very good mould , hope a couple more casting sessions will help the dropout rate , we'll see .
Again a BIG thanks to Cat and 45 2.1 for doing this .
Keith
PS , sorry bout the bad pics as my camera isn't the best for close up shots . :(