skyegod
07-28-2014, 09:50 PM
Loaded up some 50 Beowulf - Crayola Edition today :)
Not sure when I will get out to the range again - I thought I would share the Picture
111978
The blue were powdercoated with a HF PC Gun
The Red were tumble powder coated in a Lyman Tumbler
the Orange are the Epoxy.
The Easiest so far of the the 3 was the tumbler method - that gave the 2nd best "jacket" - the best coating was the epoxy - the worst was the PC Gun.
PC gun was also the messiest - the Epoxy is super easy - but because there is a longer work time it got bumped to 2nd place in the ease of use.
The Projectile is the 350gr from NOE - sized to .501 with the Lee push through sizer AFTER coating were applied.
Not sure when I will get out to the range again - I thought I would share the Picture
111978
The blue were powdercoated with a HF PC Gun
The Red were tumble powder coated in a Lyman Tumbler
the Orange are the Epoxy.
The Easiest so far of the the 3 was the tumbler method - that gave the 2nd best "jacket" - the best coating was the epoxy - the worst was the PC Gun.
PC gun was also the messiest - the Epoxy is super easy - but because there is a longer work time it got bumped to 2nd place in the ease of use.
The Projectile is the 350gr from NOE - sized to .501 with the Lee push through sizer AFTER coating were applied.