PDA

View Full Version : Rain of boolits! 321297, 285448, and 280468S



ohland
07-17-2014, 03:34 PM
110930
Laid out the work area. Yes, there are 4 molds, one is the 358430 in 195gr guise. It took a while to come up to heat and I stopped pouring before it stopped wrinkling.

110931

L-R, 280468S, 285448, 321297, and the unknown and undersize .320 as cast 160-ish grain scattergun projectile provided with the 32-40. Once the 321297 got up to heat, the boolits either fell out or took one tap to drop. The 280468S were dropping almost as soon as I opened the mold. The 285448 was problematic, most of the time I was beating on the handles to get it to drop. Yes, I did scrub em out with denatured alcohol and smoked 'em with a BBQ lighter. BBQ. Yum.

110946
80x 321297
198x 285448
121x 280468S

There are a few culls in the 280468S group, I started to drop them into the water before the mold came fully up to temp.

Even though the 285448 were difficult (lower left), they were casting good, so I had the loob monkey work it for all it was worth. The 280468S (lower right) were coming good. The 321297 were falling well (upper right).

twc1964
07-17-2014, 09:50 PM
Nice batch o boolits. i was doing the same thing today after work. There's just something relaxing and satisfying about dropping a nise pile of well filled out boolits lol