C-H4D Question

[milenfive]

I have a #105 45 SWC from CH4D it works great makes a good looking bullet.
My question is I would like the nose to look more like a HG 68 I'm going to try and call Dave today and see if he can help, but I know he's swamped with work.
I only shoot Bullseye and the nose of the bullet is such that I can't use my shoulder seater die.
Any suggestions?

Mike

[runfiverun]

might be easier to modify the seater die.

[skeettx]

Hello Milenfive
Welcome to the site :)
Congrats on your first posting !!
What brand of seater die are you using?
I have found it easy on RCBS dies to replace the seating stem
On other dies, not so easy. Sooooo, what I have done in the past
is to rough up the inside of the seater stem, and put JB Weld in the
stem and push a bullet with saran wrap on it into the JB weld.
Wait until cured and then you have a custom bullet seat.

Again, Welcome
Mike

fun reading
http://castboolits.gunloads.com/archive/index.php/t-120146.html

[FWest]

PM alfloyd, he made some punches for me for a CH4D die.

[skeettx]

To assist you in finding alfloyd I am posting a link that he started,
just click on his handle and then click on Private message.

http://castboolits.gunloads.com/showthread.php?225464-Pictures-of-the-dies-I-make&highlight=