fido
01-21-2008, 11:42 AM
What are you guys using for powder. I did some testing the other day with some varget. Started at 10 grains and worked up to 25. i noticed the powder wasn't burning very efficient at the lower charges. I was shooting out of a mini 14.
I noticed the brass was getting some dints on the taper from unburnt powder on subsequent rounds.
Any advice on other powders and grains?
I have on hand BLC2, alliant 1200, tightgroup and some others I cant think of at the moment.
Running a 55g gas checked.
Thanks
Stephen
I noticed the brass was getting some dints on the taper from unburnt powder on subsequent rounds.
Any advice on other powders and grains?
I have on hand BLC2, alliant 1200, tightgroup and some others I cant think of at the moment.
Running a 55g gas checked.
Thanks
Stephen