PDA

View Full Version : LVR in the 35 remington



nekshot
07-07-2014, 05:36 PM
I have been working on the 35 remington and the RD190 boolit and after I exhausted all powders and load combinations in H335,aa2520,BL-C2,4895,TB,Reddot,2400,unique I had I reached for some LVR and presto all the groubs stayed together with out the opening up accuracy the other powders would give as I varied the loads. I really am impressed with LVR in this gun.

gordie
07-07-2014, 08:00 PM
i just completed a similar round of tests ... w/ jacketed 200gr. hornady.

my results were the same as yours.

imr 3031, imr 4064, BL-C2, & 748, vs. LVR.

found " good enough " for whitetail loads w/ all.

748 & LVR are tied in the accuracy category... wish i had a chronograph.

Djones
07-07-2014, 08:52 PM
Same here with the 190 rd bullet.

Blc2, h322, 3031. It was and still is 41 grains of lever that has the best groups.

TXGunNut
07-07-2014, 10:01 PM
I've had good luck with Reloder #7 in the 35 Rem but LVR looks promising. If I could get my 336 to quit killing scopes I'd have a good hunting load in the books.