View Full Version : Can anyone identify this for me?
500MAG
07-05-2014, 07:58 AM
Found this in the bottom of an old box and have no idea what it went to.
gmsharps
07-05-2014, 08:29 AM
Looks like a tool for the M14. The little rod the swings out from the middle screws onto the cleaning rod section. There should a multi sided hole on one end to remove the gas plug.
gmsharps
Bad Water Bill
07-05-2014, 08:34 AM
WOW that is the thigamabob that fits on the whatchamAGIGGER of the one and only Asperlyaimless that Bullshop lost in the bush of wilderness Alaska.
Nope have not a clue
HollandNut
07-05-2014, 08:42 AM
yep gmsharps is correct a mundo
500MAG
07-05-2014, 09:10 AM
Looks like a tool for the M14. The little rod the swings out from the middle screws onto the cleaning rod section. There should a multi sided hole on one end to remove the gas plug.
gmsharps
Thanks for the help.
Petrol & Powder
07-05-2014, 10:03 AM
gmsharps is correct. It should be accompanied by a small OD green cloth bag with about 4-5 cleaning rod sections and a slotted tip. The end of the tool with the little blade is used to remove the extractor of an M-14 bolt, therefore allowing the bolt to be completely disassembled. If you use that function be careful to retain the spring and other parts. Not something I'd recommend doing in the field!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.